Harnessing the potential of CsPbBr₃-based perovskite solar cells using efficient charge transport materials and global optimization

Citations Over TimeTop 1% of 2023 papers

Abstract

Perovskite solar cells (PSCs) have become a possible alternative to traditional photovoltaic devices for their high performance, low cost, and ease of fabrication. Here in this study, the SCAPS-1D simulator numerically simulates and optimizes CsPbBr₃-based PSCs under the optimum illumination situation. We explore the impact of different back metal contacts (BMCs), including Cu, Ag, Fe, C, Au, W, Pt, Se, Ni, and Pd combined with the TiO₂ electron transport layer (ETL) and CFTS hole transport layer (HTL), on the performance of the devices. After optimization, the ITO/TiO₂/CsPbBr₃/CFTS/Ni structure showed a maximum power conversion efficiency (PCE or η) of 13.86%, with Ni as a more cost-effective alternative to Au. After the optimization of the BMC the rest of the investigation is conducted both with and without HTL mode. We investigate the impact of changing the thickness and the comparison with acceptor and defect densities (with and without HTL) of the CsPbBr₃ perovskite absorber layer on the PSC performance. Finally, we optimized the thickness, charge carrier densities, and defect densities of the absorber, ETL, and HTL, along with the interfacial defect densities at HTL/absorber and absorber/ETL interfaces to improve the PCE of the device; and the effect of variation of these parameters is also investigated both with and without HTL connected. The final optimized configuration achieved a V_OC of 0.87 V, J_SC of 27.57 mA cm-2, FF of 85.93%, and PCE of 20.73%. To further investigate the performance of the optimized device, we explore the impact of the temperature, shunt resistance, series resistance, capacitance, generation rate, recombination rate, Mott-Schottky, JV, and QE features of both with and without HTL connected. The optimized device offers the best thermal stability at a temperature of 300 K. Our study highlights the potential of CsPbBr₃-based PSCs and provides valuable insights for their optimization and future development.

Related Papers

• → Enhanced planar perovskite solar cell efficiency and stability using a perovskite/PCBM heterojunction formed in one step(2018)97 cited
• → Enhancing the perovskite solar cell performance by the treatment with mixed anti-solvent(2018)35 cited
• → High performance flexible perovskite solar cell with large area via one-step solution process(2019)4 cited
• → Studying the Effect of Changing Several Layers on the Performance of the Perovskite Solar Cell (CH3NH3PbI3) and Studying the Effect of Adding the Back Surface Filed layer to the Solar Cell Using the Simulation Program (SCAPS 1-D)(2022)1 cited
• → Optical properties and photocurrent simulation of perovskite solar cell with rectangular nanorod array(2015)