Feedback-assisted extension of the tokamak operating space to low safety factor

Citations Over TimeTop 10% of 2014 papers

Abstract

Recent DIII-D and RFX-mod experiments have demonstrated stable tokamak operation at very low values of the edge safety factor q(a) near and below 2. The onset of n = 1 resistive wall mode (RWM) kink instabilities leads to a disruptive stability limit, encountered at q(a) = 2 (limiter plasmas) and q95 = 2 (divertor plasmas). However, passively stable operation can be attained for q(a) and q95 values as low as 2.2. RWM damping in the q(a) = 2 regime was measured using active MHD spectroscopy. Although consistent with theoretical predictions, the amplitude of the damped response does not increase significantly as the q(a) = 2 limit is approached, in contrast with damping measurements made approaching the pressure-driven RWM limit. Applying proportional gain magnetic feedback control of the n = 1 modes has resulted in stabilized operation with q95 values reaching as low as 1.9 in DIII-D and q(a) reaching 1.55 in RFX-mod. In addition to being consistent with the q(a) = 2 external kink mode stability limit, the unstable modes have growth rates on the order of the characteristic wall eddy-current decay timescale in both devices, and a dominant m = 2 poloidal structure that is consistent with ideal MHD predictions. The experiments contribute to validating MHD stability theory and demonstrate that a key tokamak stability limit can be overcome with feedback.

Related Papers

• → Steady state scenario development with elevated minimum safety factor on DIII-D(2014)30 cited
• → Interaction of external n = 1 magnetic fields with the sawtooth instability in low-q RFX-mod and DIII-D tokamaks(2016)19 cited
• → Safety factor corrections to the magnetohydrodynamic internal kink mode in a tokamak(2007)6 cited
• → Stabilization of External Kink Modes by Means of a Limiter(1983)13 cited
• Robust Control of the Toroidal Rotation and Safety Factor Profiles in the DIII-D Tokamak(2011)