High-Adiabat High-Foot Inertial Confinement Fusion Implosion Experiments on the National Ignition Facility

Citations Over TimeTop 1% of 2014 papers

Abstract

This Letter reports on a series of high-adiabat implosions of cryogenic layered deuterium-tritium (DT) capsules indirectly driven by a "high-foot" laser drive pulse at the National Ignition Facility. High-foot implosions have high ablation velocities and large density gradient scale lengths and are more resistant to ablation-front Rayleigh-Taylor instability induced mixing of ablator material into the DT hot spot. Indeed, the observed hot spot mix in these implosions was low and the measured neutron yields were typically 50% (or higher) of the yields predicted by simulation. On one high performing shot (N130812), 1.7 MJ of laser energy at a peak power of 350 TW was used to obtain a peak hohlraum radiation temperature of ∼300 eV. The resulting experimental neutron yield was (2.4±0.05)×10(15) DT, the fuel ρR was (0.86±0.063) g/cm2, and the measured Tion was (4.2±0.16) keV, corresponding to 8 kJ of fusion yield, with ∼1/3 of the yield caused by self-heating of the fuel by α particles emitted in the initial reactions. The generalized Lawson criteria, an ignition metric, was 0.43 and the neutron yield was ∼70% of the value predicted by simulations that include α-particle self-heating.

Related Papers

• → Mitigating the impact of hohlraum asymmetries in National Ignition Facility implosions using capsule shims(2016)24 cited
• → Hydroscaling indirect-drive implosions on the National Ignition Facility(2022)13 cited
• Demonstration of implosion symmetry in NIF scale 0.7 Hohlraums(2024)
• → Reproducibility of hohlraum-driven implosion symmetry on the National Ignition Facility(2013)
• Mitigating the impact of hohlraum asymmetries in National Ignition Facility implosions using capsule shims(2016)