Low-field accelerator structure couplers and design techniques

Citations Over TimeTop 25% of 2004 papers

Abstract

Recent experience with $X$-band accelerator structure development has shown the rf input coupler to be the region most prone to rf breakdown and degradation, effectively limiting the operating gradient. A major factor in this appears to be high magnetic fields at the sharp edges of the coupling irises. As a first response to this problem, couplers with rounded and thickened iris horns have been employed and successfully tested at high power. To further reduce fields for higher power flow, conceptually new coupler designs have been developed, in which power is coupled through the broad wall of the feed waveguide, rather than through terminating irises. A ``mode-launcher'' coupler, which launches the ${\mathrm{TM}}_{01}$ mode in circular waveguide before coupling through a matching cell into the main structure, has been tested with great success. With peak surface fields below those in the body of the structure, this coupler represented a breakthrough in the Next Linear Collider structure program. The design of this coupler and of variations which use beam line space more efficiently are described here. The latter include a coupler in which power passes directly through an iris in the broad wall of the rectangular waveguide into a matching cell, also successfully implemented, and a variation which makes the waveguide itself an accelerating cell. We also discuss in some detail a couple of techniques for matching such couplers to traveling-wave structures using a field solver. The first exploits the cell number independence of a traveling-wave match, and the second optimizes using the fields of an internally driven structure.

Related Papers

• → W-band waveguide 3dB directional coupler based on E-plane branch line bridge(2013)13 cited
• → The Design of Ultra-Wideband High Power Dual-Directional Coupler(2022)1 cited
• → Mode composite waveguide directional coupler(2018)3 cited
• → Various Six-Port Correlators Using Coupler and Power Divider(2008)1 cited
• A Microstrip Coupler Design of Power Divider(2011)