Wind Speed and Rotor Position Sensorless Control for Direct-Drive PMG Wind Turbines

Citations Over TimeTop 10% of 2011 papers

Abstract

This paper proposes a wind speed and rotor position sensorless control for wind turbines directly driving permanent magnetic generators (PMGs). A sliding-mode observer is designed to estimate the rotor position of the PMG by using the measured stator currents and the commanded stator voltages obtained from the control scheme of the machine-side converter of the PMG wind turbine. The rotor speed of the PMG (i.e., the turbine shaft speed) is estimated from its back electromotive force using a model adaptive reference system observer. Based on the measured output electrical power and estimated rotor speed of the PMG, the mechanical power of the turbine is estimated by taking into account the power losses of the wind turbine generator system. A back-propagation artificial neural network is then designed to estimate the wind speed in real time by using the estimated turbine shaft speed and mechanical power. The estimated wind speed is used to determine the optimal shaft speed reference for the PMG control system. Finally, a sensorless control is developed for the PMG wind turbines to continuously generate the maximum electrical power without using any wind speed or rotor position sensors. The validity of the proposed estimation and control algorithms are shown by simulation studies on a 3-kW PMG wind turbine and are further demonstrated by experimental results on a 300-W practical PMG wind turbine.

Related Papers

• → Application of ultrasonic pulse-echo method to insulation condition diagnosis for large generators(2005)17 cited
• Development and Testing of a Measurement Device for Prediction of Stator Core Quality(1996)
• Inter-influence on Stator and Rotor Fault Detection in Induction Motors(2009)
• Phase axes model of three phase asynchronous machines considering stator iron loss(2004)
• Exploration the Optimized Design of Stator Slots Arrangement of Turbine Generators(2015)