The Effect of High Loaded Multiwall Carbon Nanotubes in Natural Rubber and Their Nonlinear Material Constants

Citations Over TimeTop 19% of 2017 papers

Abstract

The aim of this paper is to study the high load of multiwall carbon nanotubes (MWCNTs) in natural rubber (NR) matrix. Firstly, the rubber matrix, fillers, and crosslinker are thoroughly mixed together in two-roll mill. Rheological tests are done from which scorch time, cure time, and cure index are estimated. The kneaded mixer is then compression molded, dumb bell samples as per ASTM D412 are prepared, and tensile strength, tensile modulus, elongation at break, and hardness are measured. It is noticed that NR/30% MWCNT has shown the highest tensile strength of 23.38 MPa and Shore A hardness of 90, which is 78.18% and 91.5%, respectively, higher than the unfilled NR. The increase in strength and hardness, the ductility loss, and decrease in elongation at break are observed upon increase in filler. FTIR, SEM, and AFM examinations are done and the results show high dispersion of nanofillers and strong interfacial interaction with rubber, which is responsible for overall enhancement in mechanical properties of the nanocomposites. Furthermore, the nonlinear material constants are evaluated through extended tube model and corresponding nonlinear material constants of different filler compositions are presented for the designers to use them in their component design and analysis.

Related Papers

• → Effect of alternative carbon-based filler on rubber compounds properties(2023)2 cited
• → Morphological Study on Carbon Black Loaded Rubber Vulcanizate under Stretching(1970)8 cited
• Study on MWNTs/Carbon Black/BR Conductive Composite(2012)
• Application of Jingangsu in Rubber as Reinforcing Filler(2011)
• Effect of different sizes of carbon black on damping and mechanical properties of high damping rubber blend with wide temperature range(2014)