Optimization of Tensile and Impact Strength for Injection Moulded Nylon 66/Sic/B4c Composites
Citations Over TimeTop 13% of 2022 papers
Abstract
The mechanical properties of different polymer matrix composites are discussed in this research study. These composites are multiphase materials in which reinforcing elements and a polymer matrix are suitably combined. The mechanical properties of 18 PMCs, including nylon 66 reinforced with 5, 15, and 25% wt% silicon carbide (SiC) and nylon 66 reinforced with 5, 15, and 25% wt% boron carbide (B 4 C), were evaluated using an injection moulding technique at three different injection pressures in this study. The optimization of process parameters like reinforcement material, reinforcement quantity, and injection pressure to maximize the tensile and impact strength of nylon 66 composites are the main focus of this study. It is observed that the specimens 25% SiC with an injection pressure of 90 MPa has optimised tensile strength, while the specimen 5% B 4 C with an injection pressure of 90 MPa has optimised impact strength.
Related Papers
- → Effects of SiC contents on the microstructure and mechanical properties of Al4SiC4–SiC ceramic composites(2023)6 cited
- → Microstructure Changes and Improvement in the Mechanical Properties of As‐Cast AlSi7MgCu0.5 Alloy Induced by the Heat Treatment and ECAP Technique at Room Temperature(2018)5 cited
- → The Morphostructural, Compositional, and Electrochemical Characterization of Electrodeposited Nanolayers on a New Ti‐15Ta‐5Zr Alloy(2014)2 cited
- → Nanocrystalline NiAl-TiC Composites Sintered by the Pulse Plasma Method(2006)1 cited
- → DETERMINING QUALITY REQUIREMENTS AT THE UNIVERSITIES TO IMPROVE THE QUALITY OF EDUCATION(2018)