Removal of cyanobacteria by slow sand filtration for drinking water

Citations Over TimeTop 16% of 2012 papers

Abstract

Potential problems arising from the presence of cyanobacteria in water intended for human consumption have been reported by several researchers. Regarding water treatment plants, intact cells of cyanobacteria should be removed to avoid the release of cyanotoxins due to cell lysis. Water treatment techniques with different degrees of complexity can be employed but, whenever possible, the method of easiest installation, operation and maintenance should be selected, especially for non-industrialized countries and rural communities. In this context, research was carried out to evaluate the efficiency of slow sand filtration to treat water from Gavião reservoir in the city of Pacatuba, Ceara, Brazil, which has exhibited phytoplankton density of approximately 105 cells/mL with a prevalence of cyanobacteria representing over 90% of total cells. The results have demonstrated that slow sand filtration can be used to achieve water purification that meets federal standards. However, it was established that filtration through beds of gravel (prefilter) before the slow sand filtration is essential. The removal of phytoplankton reached values of approximately 97% and the filter run duration was more than 70 days. Furthermore, the slow sand filter was very efficient in removing total coliforms, with removal of up to 99.98%.

Related Papers

• → Slow Sand Filtration of Secondary Effluent(1993)35 cited
• → Submerged Pond Sand Filter—A Novel Approach to Rural Water Supply(2016)9 cited
• → Proposal of a Slow Filter of Sand for the Treatment of Water at House Level in Protected Areas(2012)
• → Depth Distribution of Suspended Matter in the Sand Layer of Slow Sand Filters in Winter.(1997)
• → Effect of Upflow Biological Aerated Filter as a Alternative of Rapid Sand Filter in Advanced Water Treatment System(2023)