Modeling of biomass to hydrogen via the supercritical water pyrolysis process

Abstract

A heat transfer model has been developed to predict the temperature profile inside the University of Hawaii`s Supercritical Water Reactor. A series of heat transfer tests were conducted on the University of Hawaii`s apparatus to calibrate the model. Results of the model simulations are shown for several of the heat transfer tests. Tests with corn starch and wood pastes indicated that there are substantial differences between the thermal properties of the paste compared to pure water, particularly near the pseudo critical temperature. The assumption of constant thermal diffusivity in the temperature range of 250 to 450 C gave a reasonable prediction of the reactor temperatures when paste is being fed. A literature review is presented for pyrolysis of biomass in water at elevated temperatures up to the supercritical range. Based on this review, a global reaction mechanism is proposed. Equilibrium calculations were performed on the test results from the University of Hawaii`s Supercritical Water Reactor when corn starch and corn starch and wood pastes were being fed. The calculations indicate that the data from the reactor falls both below and above the equilibrium hydrogen concentrations depending on test conditions. The data also indicates that faster heating rates may be beneficial to the hydrogen yield. Equilibrium calculations were also performed to examine the impact of wood concentration on the gas mixtures produced. This calculation showed that increasing wood concentrations favors the formation of methane at the expense of hydrogen.

Related Papers

• → Photoacoustic study of the effect of degassing temperature on thermal diffusivity of hydroxyl loaded alumina(1995)29 cited
• → Calculation of Concentration-Dependent Diffusivity in Desorption Processes in Which the Diffusivity May Have a Maximum Value, Based on the Integral Form of Diffusion Equation with the Dissolved Solid-Based Coordinate(2004)
• Estimation of diffusivity of mercury in addictived activated carbon(2005)
• Study on Measuring Diffusivity of Materials by Pyroelectric Effect(2002)
• Numerical analysis of solid thermal diffusivity based on laser photothermal method(2012)