Radon attenuation handbook for uranium mill tailings cover design
Citations Over Time
Abstract
This handbook has been prepared to facilitate the design of earthen covers to control radon emission from uranium mill tailings. Radon emissions from bare and covered uranium mill tailings can be estimated from equations based on diffusion theory. Basic equations are presented for calculating surface radon fluxes from covered tailings, or alternately, the cover thicknesses required to satisfy a given radon flux criterion. Also described is a computer code, RAECOM, for calculating cover thicknesses and surface fluxes. Methods are also described for measuring diffusion coefficients for radon, or for estimating them from empirical correlations. Since long-term soil moisture content is a critical parameter in determining the value of the diffusion coefficient, methods are given for estimating the long-term moisture contents of soils. The effects of cover defects or advection are also discussed and guidelines are given for determining if they are significant. For most practical cases, advection and cover defect effects on radon flux can be neglected. Several examples are given to demonstrate cover design calculations, and an extensive list of references is included. 63 references, 18 figures, 6 tables.
Related Papers
- A review of properties and treatment of oil sands tailings(1992)
- → Pyrite Flotation Separation and Encapsulation: A Synchronized Remediation System for Tailings Dams(2021)1 cited
- Research on comprehensive utilization status and mode of tailings resources(2011)
- Elementary Discussion on Treatment of Tailings and Tailing water from Concentrator of Metalliferous Mine(2001)
- → Identification and Analysis of Main Harmful Factors in Tailings pond(2019)