Initial VHTR accident scenario classification: models and data.

Citations Over Time

Abstract

Nuclear systems codes are being prepared for use as computational tools for conducting performance/safety analyses of the Very High Temperature Reactor. The thermal-hydraulic codes are RELAP5/ATHENA for one-dimensional systems modeling and FLUENT and/or Star-CD for three-dimensional modeling. We describe a formal qualification framework, the development of Phenomena Identification and Ranking Tables (PIRTs), the initial filtering of the experiment databases, and a preliminary screening of these codes for use in the performance/safety analyses. In the second year of this project we focused on development of PIRTS. Two events that result in maximum fuel and vessel temperatures, the Pressurized Conduction Cooldown (PCC) event and the Depressurized Conduction Cooldown (DCC) event, were selected for PIRT generation. A third event that may result in significant thermal stresses, the Load Change event, is also selected for PIRT generation. Gas reactor design experience and engineering judgment were used to identify the important phenomena in the primary system for these events. Sensitivity calculations performed with the RELAP5 code were used as an aid to rank the phenomena in order of importance with respect to the approach of plant response to safety limits. The overall code qualification methodology was illustrated by focusing on the Reactor Cavity Cooling System (RCCS). The mixed convection mode of heat transfer and pressure drop is identified as an important phenomenon for Reactor Cavity Cooling System (RCCS) operation. Scaling studies showed that the mixed convection mode is likely to occur in the RCCS air duct during normal operation and during conduction cooldown events. The RELAP5/ATHENA code was found to not adequately treat the mixed convection regime. Readying the code will require adding models for the turbulent mixed convection regime while possibly performing new experiments for the laminar mixed convection regime. Candidate correlations for the turbulent mixed convection regime for circular channel geometry were identified in the literature. We describe the use of computational experiments to obtain correction factors for applying these circular channel results to the specialized channel geometry of the RCCS. The intent is to reduce the number of laboratory experiments required. The FLUENT and Star-CD codes contain models that in principle can handle mixed convection but no data were found to indicate that their empirical models for turbulence have been benchmarked for mixed convection conditions. Separate effects experiments were proposed for gathering the needed data. In future work we will use the PIRTs to guide review of other components and phenomena in a similar manner as was done for the mixed convection mode in the RCCS. This is consistent with the project objective of identifying weaknesses or gaps in the code models for representing thermal-hydraulic phenomena expected to occur in the VHTR both during normal operation and upsets, identifying the models that need to be developed, and identifying the experiments that must be performed to support model development.

Related Papers

• → A methodology to investigate the contribution of conduction and radiation heat transfer to the effective thermal conductivity of packed graphite pebble beds, including the wall effect(2017)36 cited
• → Modelling of Operating Conditions of Conduction Heat Transfer Mode Using Energy 2D Simulation(2018)28 cited
• → Development and application of CFD and subchannel coupling analysis code for lead‐cooled fast reactor(2019)10 cited
• → Design and evaluation of Operation Grade Decay Heat Removal System of PFBR(2011)10 cited
• Study on diverse passive decay heat removal approach(2012)