Direct containment heating models in the CONTAIN code

Citations Over Time

Abstract

The potential exists in a nuclear reactor core melt severe accident for molten core debris to be dispersed under high pressure into the containment building. If this occurs, the set of phenomena that result in the transfer of energy to the containment atmosphere and its surroundings is referred to as direct containment heating (DCH). Because of the potential for DCH to lead to early containment failure, the U.S. Nuclear Regulatory Commission (USNRC) has sponsored an extensive research program consisting of experimental, analytical, and risk integration components. An important element of the analytical research has been the development and assessment of direct containment heating models in the CONTAIN code. This report documents the DCH models in the CONTAIN code. DCH models in CONTAIN for representing debris transport, trapping, chemical reactions, and heat transfer from debris to the containment atmosphere and surroundings are described. The descriptions include the governing equations and input instructions in CONTAIN unique to performing DCH calculations. Modifications made to the combustion models in CONTAIN for representing the combustion of DCH-produced and pre-existing hydrogen under DCH conditions are also described. Input table options for representing the discharge of debris from the RPV and the entrainment phase of the DCH process are also described. A sample calculation is presented to demonstrate the functionality of the models. The results show that reasonable behavior is obtained when the models are used to predict the sixth Zion geometry integral effects test at 1/10th scale.

Related Papers

• Analyses of corium spreading in Mark I containment geometry(1991)
• → Pneumatic pressure tests of steel containment models — Recent developments(1984)1 cited
• The Plant-specific Impact of Different Pressurization Rates in the Probabilistic Estimation of Containment Failure Modes(2003)
• → Analysis of the Pressure Transient and Burst Pressure for Exposure of the 9975 Primary Containment Vessel to Fire(2014)
• → Dynamic analysis of pressurization of containment building of a pressurized water reactor with phase change materials(2022)