Effect of Mineral Additives on the Behavior of an Expansive Soil for Use in Highway Subgrade Soils

Citations Over Time

Abstract

Black cotton soil (BCS) forms a major soil group in Kenya and is characterized by high shrink/swell potential when exposed to water. A comprehensive series of laboratory tests were performed on BCS treated with lime (0–9%), volcanic ash (VA, 0–25%), and their combinations in order to study the physical–mechanical properties and mineralogical changes of the stabilized BCS. Moreover, a test road which replaced the BCS with the lime–VA-stabilized BCS was constructed to investigate the moisture change and soil movement in the BCS foundation. The results revealed that BCS stabilized with combinations of lime and VA shows larger California bearing ratio (CBR) and unconfined compressive strength (UCS) values when compared with a single stabilizer. BCS stabilized with 3% lime + 15% VA meets the performance requirements of roadbed materials in accordance with JTG D30-2015. The increase of pH and electrical conductivity (EC) in the stabilized soil promotes chemical reactions between the stabilizers and BCS to form new cementing agents, which are confirmed by X-ray diffraction (XRD) and transmission electron microscope (TEM) findings. The replacement of BCS with 3% lime + 15% VA-stabilized BCS shows an obvious effect on controlling the moisture change and soil movement in the foundation BCS. This research provides a low-cost strategy for making use of the vast resources of BCS in Kenya obtained from foundation excavation.

Related Papers

• Prediction and Control Method for Deformation of Highway Expansive Soil Subgrade(2015)
• → Study on the Engineering Characteristic of California Bearing Ratio (CBR) of Expressway Subgrade Material(2009)2 cited
• → Study on the Engineering Characteristic of California Bearing Ratio (CBR) of Expressway Subgrade Material(2011)1 cited
• Expansive Soil Subgrade Diseases of High-grade Highway and Solving Measures(2008)
• Construction Method of Expansive Soil Subgrade in Highway Engineering(2013)