Solid-State DC Circuit Breakers and Their Comparison in Modular Multilevel Converter Based-HVDC Transmission System
Citations Over TimeTop 10% of 2021 papers
Abstract
This paper proposes a new and surge-less solid-state direct current (DC) circuit breaker in a high-voltage direct current (HVDC) transmission system to clear the short-circuit fault. The main purpose is the fast interruption and surge-voltage and over-current suppression capability analysis of the breaker during the fault. The breaker is equipped with series insulated-gate bipolar transistor (IGBT) switches to mitigate the stress of high voltage on the switches. Instead of conventional metal oxide varistor (MOV), the resistance–capacitance freewheeling diodes branch is used to bypass the high fault current and repress the over-voltage across the circuit breaker. The topology and different operation modes of the proposed breaker are discussed. In addition, to verify the effectiveness of the proposed circuit breaker, it is compared with two other types of surge-less solid-state DC circuit breakers in terms of surge-voltage and over-current suppression. For this purpose, MATLAB Simulink simulation software is used. The system is designed for the transmission of 20 MW power over a 120 km distance where the voltage of the transmission line is 220 kV. The results show that the fault current is interrupted in a very short time and the surge-voltage and over-current across the proposed breaker are considerably reduced compared to other topologies.
Related Papers
- → Successful fault current interruption on DC circuit breaker(2016)24 cited
- → Investigation on circuit breaker influence on transient recovery voltage(2007)10 cited
- → Transient Recovery Voltages and Circuit-Breaker Performance(1942)9 cited
- → Transient Recovery Voltage Failures of Two 15 kV Indoor Oilles Circuit Breakers(1983)7 cited
- → Transient recovery voltages and circuit-breaker performance(1942)