A Triangular Structure Constraint for Pedestrian Positioning with Inertial Sensors Mounted on Foot and Shank
Citations Over Time
Abstract
To suppress pedestrian positioning drift, a velocity constraint commonly known as zero-velocity update (ZUPT) is widely used. However, it cannot correct the error in the non-zero velocity interval (non-ZVI) or observe heading errors. In addition, the positioning accuracy will be further affected when a velocity error occurs in the ZVI (e.g., foot tremble). In this study, the foot, ankle, and shank were regarded as a triangular structure. Consequently, an angle constraint was established by utilizing the sum of the internal angles. Moreover, in contrast to the traditional ZUPT algorithm, a velocity constraint method combined with Coriolis theorem was constructed. Magnetometer measurements were used to correct heading. Three groups of experiments with different trajectories were carried out. The ZUPT method of the single inertial measurement unit (IMU) and the distance constraint method of dual IMUs were employed for comparisons. The experimental results showed that the proposed method had high accuracy in positioning. Furthermore, the constraints built by the lower limb structure were applied to the whole gait cycle (ZVI and non-ZVI).
Related Papers
- → Review on Microscopic Pedestrian Simulation Model(2016)53 cited
- THE POSITION OF THE PEDESTRIAN ON CROSSINGS LOCATIONS. MAIN REPORT AND APPENDICES REPORT(1996)
- Analysis on Influence of Design of Pedestrian Bridge to Pedestrian Traffic(2013)
- → CITY PEDESTRIAN BRIDGES(2020)
- → Effective application condition of exclusive pedestrian phases(2021)