Recent Experiences with Iodine Water Disinfection in Shuttle
Abstract
<div class="htmlview paragraph">Microbial proliferation in the STS potable water system is prevented by maintaining a 2-5 ppm iodine residual. The iodine is added to fuel cell water by an iodinated ion exchange resin in the Microbial Check Valve (MCV). Crew comments indicated excessive iodine in the potable water. To better define the problem, a method of in-flight iodine analysis was developed. Inflight analysis during STS-30 and STS-28 indicated iodine residuals were generally in the 9-13 ppm range. It was determined that the high iodine residual was caused by MCV influent temperatures in excess of 120 °F. This is well above the MCV operating range of 65-90 °F. The solution to this problem was to develop a resin suitable for the higher temperatures. Since 8 months were required to formulate a MCV resin suitable for the higher temperatures, a temporary solution was necessary. Two additional MCV's were installed on the chilled and ambient water lines leading into the galley to remove the excess iodine. These reduced the iodine residual to 3-4 ppm during STS-33, STS-34, STS-36 and STS-32. A high-temperature resin was formulated and was initially flown on STS-31.</div>
Related Papers
- → Iodoinsulin Used To Determine Specific Activity of Iodine-131(1966)46 cited
- → Utilisation of iodine from different sources in pigs(2000)14 cited
- [Relevance of an iodine allergy to commercial polyvidone-iodine preparations].(1983)
- Susquehanna Chorale Spring Concert "Roots and Wings"(2017)
- → DETERMINING QUALITY REQUIREMENTS AT THE UNIVERSITIES TO IMPROVE THE QUALITY OF EDUCATION(2018)