Applications of rheological torque–time curves to the study of thermooxidative degradation of polypropylene powder

Citations Over Time

Abstract

Abstract The torque–time curves of polypropylene (PP) powder treated under various thermooxidative degradation conditions were obtained through processing in the mixing chamber of a rheometer. Meanwhile, the Fourier transform infrared (FTIR) spectra of the corresponding samples were determined, and the quantitative analysis of the carbonyl indices of the FTIR spectra of the samples of the PP powder was carried out to provide evidence for the rheological characterization. PP granules, to which an antideteriorant was added before they were commercially supplied so good antidegradation could be achieved, was investigated for the sake of contrast. The analysis of the experimental results showed that the height of the torque–time curve of the PP powder and the corresponding value of the equilibrium torque could be used to characterize or evaluate the variations of the thermooxidative degradation of the PP powder. Under the same processing conditions, the heights of the torque–time curves of the PP powder and the corresponding values of the equilibrium torque decreased with the enhancement of the thermooxidative degradation treatment before mixing; on the contrary, the heights and areas of the characteristic bands of the carbonyl groups in the FTIR spectra of the PP powder and the corresponding values of the carbonyl index increased. The quantitative analysis of the FTIR spectra provided evidence for the conclusion that the heights of the torque–time curves of the PP powder and the corresponding values of the equilibrium torque could be used to characterize or evaluate the thermooxidative degradation of the PP powder. If the treatment under thermooxidative degradation conditions weakened or the degradation of the PP powder just began (i.e., in the viscosity range for processability), the evaluation method using the heights of the torque–time curves of the PP powder or the corresponding values of the equilibrium torque could provide more sensitivity than the method using the values of the carbonyl index. Consequently, the method using the heights of the torque–time curves to evaluate the thermooxidative degradation of the PP powder had its advantages. The application of the torque–time curves could be used to evaluate not only the variation of the thermooxidative degradation of the PP powder treated under aging conditions before mixing but also the variation of the degradation, including the mechanochemical degradation, of the PP powder during the period of mixing. The dependence of the variation of the degradation of the polymer on the processing time during mixing could be evaluated by the study of the variation of the torque–time curves. It can be concluded that the application of torque–time curves to the evaluation of degradation of PP powder has the advantages of being convenient, real‐time, in situ , online, and production‐oriented. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007

Related Papers

• → The Rheology Handbook: For users of rotational and oscillatory rheometers(2020)528 cited
• → Investigating the time-varying effect and accurate measurement method of wet shotcrete rheology based on eBT2 rheometer(2023)5 cited
• → How to Prepare SMC and BMC-like Compounds to Perform Relevant Rheological Experiments?(2012)9 cited
• → Development of Alternative Rheological Measurements for DWPF Slurry Samples (U)(2005)3 cited