Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA‐15 Catalyst

Citations Over TimeTop 10% of 2015 papers

Abstract

The hydrogenation of furfural to furfuryl alcohol was performed in the presence of a Co/SBA-15 catalyst. High selectivity (96 %) at a conversion higher than 95 % is reported over this catalytic system. As the conversion of furfural to furfuryl alcohol occurs over metallic Co sites, the effect of reduction temperature, H2 pressure, and reaction temperature were studied. Optimum reaction conditions were: 150 °C, 1.5 h, 2.0 MPa of H2 . The catalyst was recyclable, and furfuryl alcohol was recovered with a purity higher than 90 %. The effect of the solvent concentration was also studied. With a minimum of 50 wt % of solvent, the selectivity to furfuryl alcohol and the conversion of furfural remained high (both over 80 %). Likewise, the activity of the catalyst is maintained even in pure furfural, which confirms the real potential of the proposed catalytic system. This catalyst was also used in the hydrogenation of levulinic acid to produce γ-valerolactone selectively.

Related Papers

• → Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA‐15 Catalyst(2015)198 cited
• → Structure‐Reactivity Relations in Ruthenium Catalysed Furfural Hydrogenation(2019)74 cited
• → Mini-Review on the Synthesis of Furfural and Levulinic Acid from Lignocellulosic Biomass(2021)42 cited
• → Inside Back Cover: Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA‐15 Catalyst (ChemSusChem 11/2015)(2014)2 cited
• Modifying Study on Cu/Al_2O_3 Catalyst for Hydrogenation of Furfural to Furfuryl Alcohol(2011)