Fermi Level Pinning at Electrical Metal Contacts of Monolayer Molybdenum Dichalcogenides

Citations Over TimeTop 1% of 2017 papers

Abstract

Electrical metal contacts to two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs) are found to be the key bottleneck to the realization of high device performance due to strong Fermi level pinning and high contact resistances (R_c). Until now, Fermi level pinning of monolayer TMDCs has been reported only theoretically, although that of bulk TMDCs has been reported experimentally. Here, we report the experimental study on Fermi level pinning of monolayer MoS₂ and MoTe₂ by interpreting the thermionic emission results. We also quantitatively compared our results with the theoretical simulation results of the monolayer structure as well as the experimental results of the bulk structure. We measured the pinning factor S to be 0.11 and -0.07 for monolayer MoS₂ and MoTe₂, respectively, suggesting a much stronger Fermi level pinning effect, a Schottky barrier height (SBH) lower than that by theoretical prediction, and interestingly similar pinning energy levels between monolayer and bulk MoS₂. Our results further imply that metal work functions have very little influence on contact properties of 2D-material-based devices. Moreover, we found that R_c is exponentially proportional to SBH, and these processing parameters can be controlled sensitively upon chemical doping into the 2D materials. These findings provide a practical guideline for depinning Fermi level at the 2D interfaces so that polarity control of TMDC-based semiconductors can be achieved efficiently.

Related Papers

• → Mechanism of Schottky barrier formation: The role of amphoteric native defects(1987)110 cited
• → Schottky barrier height engineering in vertical p-type GaN Schottky barrier diodes for high-temperature operation up to 800 K(2022)6 cited
• → Analysis of thermionic emission from electrodeposited Ni–Si Schottky barriers(2006)27 cited
• → Effect of temperature-dependent work function and fermi energy on thermionic emission current density in graphene(2018)3 cited
• → Features of Charge Transport in Mo/n-Si Structures with a Schottky Barrier(2013)