An Edge Crack Torsion Method for Mode III Delamination Fracture Testing

Citations Over TimeTop 10% of 1993 papers

Abstract

A new fracture toughness test, the edge crack torsion method, has been developed for characterizing the mode III delamination behavior of composites. The test is based on a laminate specimen subjected to torsion to propagate an edge delamination crack in its midplane. The crack growth mode of the specimen has been deduced to be mode III from fracture mechanics principles. The torsional behavior and the corresponding fracture parameter GIIIC have been analyzed on the basis of plate torsion and laminate theory. Edge crack torsion tests were performed to measure GIIIC of several carbon fiber/epoxy composite systems. Laminate layups were optimized to yield linear elastic fracture behavior of the specimens. The specimens were also sufficiently compliant to allow GIIIC to be readily obtained by using the compliance calibration method. The deformation characteristics of the specimens were found to follow the laminate torsion description. SEM observations showed fracture surface morphology varying with resin microstructures and, for the case of an untoughened matrix, were consistent with what was reported in the literature for other proposed mode III fracture tests.

Related Papers

• → Study of mode I crack dynamic propagation behaviour and rock dynamic fracture toughness by using SCT specimens(2018)35 cited
• → Test method for fracture toughness GIC based on ubiquitiform theory(2022)4 cited
• RESEARCH ON DYNAMIC FRACTURE BEHAVIORS OF STANSTEAD GRANITE(2010)
• → Can Fracture Toughness be Used as a Proxi for Fracability?(2012)1 cited
• → FRACTURE OF CONCRETE APPROACHED BY FRACTURE MECHANICS : Part 1 Fracture of Concrete in Tensile Stress Field(1979)