Validation of RELAP5 model of experimental test rig simulating the natural convection in MTR research reactors

Abstract

Abstract In an attempt to understand the built-up of natural circulation in MTR pool type upward flow research reactors after loss of power, an experimental test rig was built to simulate the loop of natural circulation in MTR reactors. The test rig consisting of two vertically oriented branches, in one of them the core is simulated by two rectangular, electrically heated, parallel channels. The other branch simulates the part of the return pipe that participates in the development of core natural circulation. In the first phase of the work, many experimental runs at different conditions of channel's power and branch's initial temperatures are performed. The channel's coolant and surface temperatures were measured. The measurements and their interpretation were published by the first three authors. In the present work the thermal hydraulic behavior of the test rig is complemented by theoretical analysis using RELAP5 Mod 3.3 system code. The analysis consisting of two parts; in the first part RELAP5 model is validated against the measured values and in the second part some of the other not measured hydraulic parameters are predicted and analyzed. The test rig is typically nodalized and an input dick is prepared. In spite of the low pressure of the test rig, the results show that RELAP5 qualitatively predicts the thermal hydraulic behaviour and the accompanied phenomenon of flow inversion of such facilities. Quantitatively, there is a difference between the predicted and measured values especially the channel's surface temperature. This difference may be return to the uncertainties in initial conditions of experimental runs, the position of the thermocouples which buried inside the heat structure, and the heat transfer package in RELAP5.

Related Papers

• → Thermal hydraulic studies on cold start-up in a multichannel natural circulation system(2018)7 cited
• → Experimental and Numerical Investigation on a Two-Phase Natural Circulation Test Facility(2012)10 cited
• → Thermal-Hydraulic System-Level Analysis of a Molten Salt Natural Circulation Loop(2022)3 cited
• → Validation of RELAP5 model of experimental test rig simulating the natural convection in MTR research reactors(2016)
• Thermal—hydraulic stability of a natural circulation system with nuclear feedback(1997)