Real-Time Measurement of Camshaft Wear in an Automotive Engine - a Radiometric Method
Citations Over Time
Abstract
A radiometric method has been developed for the determination of camshaft wear during engine operation. After a radioactive tracer is induced at the tips of one or more cam lobes by the technique of surface layer activation, calibration procedures are performed to determine the amount of radioactive material remaining versus the depth worn. The decrease in {gamma}-ray intensity measured external to the engine is then directly related to cam lobe wear. By incorporating a high-resolution detector and an internal radioactive standard, measurement accuracy better than {plus}{equals}0.2 {mu}m at 95% confidence has been achieved. Without the requirement of engine disassembly, this method has provided unique measurements of break-in wear and wear as a function of operating conditions. Because this approach requires only low levels of radiation, it has significant potential applications in wear control.
Related Papers
- → Real-Time Measurement of Camshaft Wear in an Automotive Engine - a Radiometric Method(1990)11 cited
- → Increasing the capacity of camshafts in automobile engines by plastic strain hardening of the surface(1979)
- Size recovery for cast iron camshaft of car engine(2015)
- Application on Sensors in Automotive Engine(2007)
- Gear ratting noise reduction of diesel engine; Diesel engine no gear hauchi soon teigen(1997)